Erratum: Experimental study on vibration characteristics of fluid-solid coupling cantilever thin aluminum plate

Yinhang Ma1 , Hanyang Jiang2 , Meiling Dai3 , Fujun Yang4

1, 2, 4Jiangsu Key Laboratory of Engineering Mechanics, Southeast University, Nanjing, 211189, China

3School of Civil and Transportation Engineering, Guangdong University of Technology, Guangzhou, 510006, China

1Corresponding author

Journal of Vibroengineering, Vol. 22, Issue 6, 2020, p. 1547-1547. https://doi.org/10.21595/jve.2020.21662
Received 16 August 2020; accepted 16 August 2020; published 7 September 2020

Copyright © 2020 Yinhang Ma, et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Creative Commons License
Table of Contents Download PDF
Cite this article
Views 21
Reads 7
Downloads 186
CrossRef Citations 0

The description of the correction

There was an error in the spelling of the given names of the authors in the paper finally approved (after the acceptance) by the authors.

Incorrect author names:

Ma Yinhanga1, Jiang Hanyanga2, Dai Meilingb3, Yang Fujuna4

Revised author names:

Yinhang Ma1, Hanyang Jiang2, Meiling Dai3, Fujun Yang4