Erratum: The simulation analysis of lifting type tractor’s ride comfort based on ADAMS/view
Jubin Qiao1 , Haijing Yan2 , Zhiyong Wang3
1, 2, 3Binzhou University College of Electromechanical Engineering, Binzhou, China
1Corresponding author
Mathematical Models in Engineering, Vol. 4, Issue 4, 2018, p. 216-216.
https://doi.org/10.21595/mme.2018.20277
Accepted 3 October 2018; published 31 December 2018
Copyright © 2018 Jubin Qiao, et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Back to Original Publication.
Table of Contents
Download PDF
Acknowledgements
Cite this article
Views
12
Reads
7
Downloads
531
CrossRef Citations
0
JVE Conferences

"Vibration and Acoustics in Civil Engineering and Fault Diagnostics"
March 25-27, 2021
in
Dubai, United Arab Emirates

"Dynamics, Noise and Vibration Engineering: Problems and Applications"
May 7-8, 2021
in
Dublin, Ireland

"Nonlinear Dynamics and Chaos in Engineering Applications"
June 28-30, 2021
in
St. Petersburg, Russia

"Challenges of Vibrations in Mechanical, Mechatronical and Electrical Systems"
September 20-22, 2021
in
Zittau, Germany
The description of the correction
The acknowledgements section was missing in the paper originally submitted and finally approved (after the acceptance) by the authors.
Acknowledgements
Binzhou University Experimental Technology Research Project: Application of Virtual Simulation Technology in Vehicle Engineering Experiment Teaching, BZXYSYXM201410.