Erratum: Local vibration characteristics of rotating blades induced by moving rub impact loads

Chaofeng Li1 , Houxin She2 , Shuhua Yang3 , Hexing Yu4 , Bangchun Wen5

1, 2, 4, 5School of Mechanical Engineering and Automation, Northeastern University, Shenyang, 110819, China

3Shenyang Blower Works Group M&C Tech. Co. Ltd., Shenyang, 110869, China

1Corresponding author

Journal of Vibroengineering, Vol. 20, Issue 7, 2018, p. 2782-2782. https://doi.org/10.21595/jve.2018.20365
Accepted 11 November 2018; published 15 November 2018

Copyright © 2018 JVE International Ltd. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Creative Commons License
Table of Contents Download PDF
Cite this article
Views 33
Reads 10
Downloads 694
WoS Core Citations 0
CrossRef Citations 0

The description of the correction

Fig. 1(a) from the Ref. [1] was used, but the reference was not cited in figure title and the copyright was missing in the original article and finally approved (after the acceptance) by the authors.

The revised figure title is as follows:

Fig. 1. Schematic of rotating blades force environment: a) Cut-view of an aircraft engine with sensitive contact areas [1] (https://doi.org/10.1115/1.4006446; Copyright © 2012 by American Society of Mechanical Engineers); b) Schematic of blade-casing

 Schematic of rotating blades force environment: a) Cut-view of an aircraft engine with sensitive contact areas [1] (https://doi.org/10.1115/1.4006446; Copyright © 2012 by American Society of Mechanical Engineers); b) Schematic of blade-casing

a)

 Schematic of rotating blades force environment: a) Cut-view of an aircraft engine with sensitive contact areas [1] (https://doi.org/10.1115/1.4006446; Copyright © 2012 by American Society of Mechanical Engineers); b) Schematic of blade-casing

b)