Erratum: Cogging force reduction for tubular permanent magnet linear motor by slots with different sizes

Pengfei Hou1 , Kefeng Huang2 , Puyu Wang3 , Jinquan Wang4 , Ye Xu5

1, 2, 4, 5PLA University of Science and Technology, Nanjing, 210007, China

3Nanjing University of Science and Technology, Nanjing, 210094, China

2Corresponding author

Journal of Vibroengineering, Vol. 20, Issue 6, 2018, p. 2539-2539. https://doi.org/10.21595/jve.2018.20272
Accepted 30 September 2018; published 30 September 2018

Copyright © 2018 JVE International Ltd. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Creative Commons License

The description of the correction

The acknowledgements section was missing in the paper originally submitted and finally approved (after the acceptance) by the authors.

Acknowledgements

This work was supported by the Fundamental Research Funds for the Central Universities under Grant No. 30917011330.