Erratum: Modeling and analysis of stick-slip vibration and bit bounce in drillstrings

Fushen Ren1 , Baojin Wang2

1Missouri University of Science and Technology, Rolla, the United States

1, 2Northeast Petroleum University, Daqing, China

1Corresponding author

Journal of Vibroengineering, Vol. 20, Issue 2, 2018, p. 1273-1273. https://doi.org/10.21595/jve.2018.19813
Accepted 9 March 2018; published 31 March 2018

Copyright © 2018 JVE International Ltd. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Creative Commons License
Table of Contents Download PDF
Cite this article
Views 27
Reads 8
Downloads 812
WoS Core Citations 0

The description of the correction

The order of affiliation was wrong in the paper originally submitted and finally approved (after the acceptance) by the authors.

Incorrect affiliations:

1Missouri University of Science and Technology, Rolla, the United States

1, 2Northeast Petroleum University, Daqing, China

Revised affiliations:

1, 2Northeast Petroleum University, Daqing, China

1Missouri University of Science and Technology, Rolla, the United States

Cited By

MATEC Web of Conferences
M. Firdaus Isham, M. Salman Leong, M. H. Lim, M. K. Zakaria, Lim Meng Hee
2019