Erratum: Structural health monitoring of 3D frame structures using finite element modal analysis and genetic algorithm

S. Tiachacht1 , A. Bouazzouni2 , S. Khatir3 , A. Behtani4 , Y.-L.-M. Zhou5 , M. Abdel Wahab6

1, 2, 4Laboratory of Mechanics, Structure and Energetics (LMSE), Mouloud Mammeri University of Tizi-Ouzou, B.P.N°17 RP, 15000, Algeria

3Department of Electrical Energy, Systems and Automation, Faculty of Engineering and Architecture, Ghent University, Ghent, Belgium

5Department of Civil and Environmental Engineering, National University of Singapore, 2 Engineering Drive 2, 117576, Singapore

6Division of Computational Mechanics, Ton Duc Thang University, Ho Chi Minh City, Vietnam

6Faculty of Civil Engineering, Ton Duc Thang University, Ho Chi Minh City, Vietnam

6Soete Laboratory, Faculty of Engineering and Architecture, Ghent University, Technologiepark Zwijnaarde 903, B-9052, Zwijnaarde, Belgium

6Corresponding author

Journal of Vibroengineering, Vol. 20, Issue 2, 2018, p. 1272-1272. https://doi.org/10.21595/jve.2018.19767
Accepted 25 February 2018; published 31 March 2018

Copyright © 2018 JVE International Ltd. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Creative Commons License
Table of Contents Download PDF
Cite this article
Views 24
Reads 10
Downloads 789

The description of the correction

The author’s name was misspelled in the paper originally submitted and finally approved (after the acceptance) by the Authors.

Incorrect author’s name:

Y.-L.-M. Zhou

Correct author’s name:

Y.-L. Zhou

Cited By

Engineering with Computers
Xuan-Nam Bui, Hossein Moayedi, Ahmad Safuan A. Rashid
2020