Application of Flat Controlled Damping Constructions for Vibroprotection of Elements of On-board Precision Equipment

A. Bubulis1 , V. P. Roisman2 , E. V. Korobko3 , M. A. Zhurauski4 , A. O. Karabko5

1Kaunas University of Technology, LT-44029, K. Donelaicio str. 73, Lithuania

2, 3, 4Heat and Mass Transfer Institute of NANB, 220072, P. Brovka str. 15, Minsk, Belarus

5University Informatics and Radioelectronics, 220013, Brovka str. 6, Minsk, Belarus

3Corresponding author

Vibroengineering PROCEDIA, Vol. 1, 2013, p. 23-26.
Accepted 1 September 2013; published 15 September 2013

Copyright © 2013 Vibroengineering This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Creative Commons License
Table of Contents Download PDF
Cite this article
Views 6
Reads 0
Downloads 696
This publication is only available via PDF.
Download PDF