Simulation of Performance Characteristics of a Magnetorheological Shock-Absorber at the Dependence of Rheological Properties from the Magnetic Field

Bilyk, V. A.; Korobko, E. V.; Kuzmin, V. A.

Vibroengineering Procedia

Browse Procedia

Published: 15 September 2013

Check for updates

Simulation of Performance Characteristics of a Magnetorheological Shock-Absorber at the Dependence of Rheological Properties from the Magnetic Field

V. A. Bilyk¹

E. V. Korobko²

V. A. Kuzmin³

^{1, 2, 3}Luikov A.V. Heat and Mass Transfer Institute of the National Academy of Sciences of Belarus, 15 P Brovki st., Minsk, 220072, Belarus

Corresponding Author:

V. A. Bilyk

Cite the article Download PDF

Downloads 1229

Abstract

The mathematical model of a magnetorheological shock-absorber taking into account of the dependence of rheological properties from the magnetic field is developed. Performance characteristics of the MR shock-absorber (dependences of force on value of control electric signal taking into account of shock-absorber geometry, rod displacement, rheological properties of MR fluid) are calculated. The analysis of influence of control electric signal value on MR shock-absorber performance characteristics depending on amplitudes and frequencies of piston movement is carried out.

About this article

Received

Accepted

01 September 2013

Published

15 September 2013

This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.