Cutting tool vibration in the metal cutting process

V. Gutakovskis1 , G. Bunga2 , G. Pikurs3

Journal of Vibroengineering, Vol. 13, Issue 4, 2011, p. 676-681.
Received 30 September 2011; accepted 4 December 2011; published 31 December 2011

Copyright © 2011 Vibroengineering This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Creative Commons License
Table of Contents Download PDF
Cite this article
Views 37
Reads 0
Downloads 782
This publication is only available via PDF.
Download PDF