Published: 30 September 2011

Improved smoothing procedure for determination of stresses

J. Ragulskiene1
B. Spruogis2
R. Maskeliunas3
L. Zubavicius4
Views 0
Reads 0
Downloads 999

Abstract

Stresses in the coating of a straight beam performing transverse vibrations are analyzed. The numerical procedure is based on the technique of conjugate approximation with smoothing. In the paper the smoothing procedure for one dimensional Lagrange quadratic elements is proposed. This procedure has advantages over the conventional smoothing procedure. Comparisons of the results obtained by using both smoothing procedures are presented.

About this article

Received
19 May 2011
Accepted
05 September 2011
Published
30 September 2011
Keywords
beam
vibrations
eigenmode
coating
stresses
conjugate approximation
conjugate smoothing