Published: 30 September 2011

Frequency – based crack identification for static beam with

B. Li1
Z. J. He2
Views 0
Reads 0
Downloads 1023

Abstract

Aiming at the most dangerous crack damage in structural health, a crack identification method based on wavelet finite element model and determinant transformation method is conducted. Natural frequencies of the structure with various crack locations and depths are first accurately obtained by means of wavelet finite element methods. Then, the actual structures are measured to gain vibration characteristics. Measured natural frequencies are used in a crack detection process, while crack location and size can be identified using determinant transformation method. The experimental example of a static beam with rectangle cross-section indicates that the current method is effective and accurate. The whole approach provides a powerful technology for practical application.

About this article

Received
23 May 2011
Accepted
01 September 2011
Published
30 September 2011
Keywords
crack detection
vibration
wavelet finite element method
determinant transformation