Principle and data analysis of vertical angle calibration of geodetic instruments
D. Brucas1 , A. Anikeniene2 , L. Šiaudinyte3 , V. Giniotis4 , J. Stankunas5 , A. Zakarevicius6 , J. Skeivalas7
Journal of Vibroengineering, Vol. 12, Issue 4, 2010, p. 635-641.
Received 3 November 2010; accepted 9 December 2010; published 31 December 2010
Copyright © 2010 Vibroengineering This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
"Noise, Vibration and Harshness and Condition Based Monitoring" December 3, 2021 in Colombo, Sri Lanka
"System Vibration, Chaos and Condition Monitoring" December 5-7, 2021 in Udaipur, India
"Noise, Vibration and Harshness and Condition Based Monitoring" February 5, 2022 in Shanghai, China
"Challenges of Vibrations in Mechanical, Mechatronical and Electrical Systems" March 2, 2022 in Zittau, Germany
This publication is only available via PDF.