An idea of the electronic control system for the multifunctional hydraulic machine

J. Stryczek, P. Antoniak, M. Banas

Journal of Vibroengineering, Vol. 12, Issue 3, 2010, p. 329-332.
Received 30 July 2010; accepted 10 September 2010; published 30 September 2010

Copyright © 2010 Vibroengineering This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Creative Commons License
Abstract. The paper presents an electronic control system for application in mobile hydraulic systems. Key components of the system and its advantages have been discussed. A multifunctional hydraulic machine, its design and operation principle have been presented. The concept of control work machine with the electronic control system has been developed. The benefits of integration of these systems have been highlighted

Keywords: mechatronic systems, mobile electronics, controller .