Abstract
This paper is based on research of work parameters of rotary systems with segmental sliding bearings, working system in the resonant regime. Primary signals are given doing experimental researches, they are analyzed with special programmable pockets and different formats of data are given. Evaluation of work state of rotary system is done in the resonant and in the normal regime by getting orbits of rotor rotation. The principal scheme of researching system is given in this work and its technical characteristics and principle of working are described. Methodology of experimental researches is given. The gained results are described in graphs and a comparison of obtaining results and its discussion
About this article
Received
03 July 2007
Accepted
13 September 2007
Published
30 September 2007
Keywords
rotor system
resonance
frequency
adaptive segmental sliding bearing
axis
orbit
Copyright © 2007 Vibroengineering
This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
