VP

Vibroengineering PROCEDIA

 

October 2016. Volume 8, Pages (1-537). ISSN 2345-0533

Contents

Mechanical vibrations and applications

 

The kinematic analysis of flat lever mechanisms with application of vector calculation

1

Algazy Zhauyt, Gulnar Mamatova, Kuanysh Alipov, Aizhan Sakenova, Raushan Abdirova

 

The use of fuzzy control methods for evaluation of complex systems on the example of maritime fleet equipment

6

Anatoliy Nyrkov, Anton Zhilenkov, Sergei Sokolov, Sergei Chernyi

 

Increasing efficiency and environmental safety of cooling systems in a floating nuclear power plant

11

Valeriy Yenivatov, Konstantin Fedorovsky

 

The study of the process of the development of marine robotics

17

Anton Zhilenkov

 

Study of thermal stonecutting tools

22

Yerlik Nurymov, Amina Bukayeva, Algazy Zhauyt, Vitaly Povetkin, Yerlan Askarov

 

Vibration analysis of adding contaminants particles and carbon nanotubes to lithium grease of ball bearing

28

A. Nabhan

 

Nonlinear system identification with the use of describing functions – a case study

33

Zhongge Zhao, Chuanri Li, Kjell Ahlin, Huan Du

 

Simulation of chip‑formation by a single grain of pyramid shape

39

S. A. Voronov, Weidong Ma

 

Investigation of longitudinal oscillations warp in the process of changing parameters system

45

Alexandra Ivanovskaya, Vladimir Popov

 

Estimation of damping capacity of rubber vibration isolators under harmonic excitation

50

Svetlana Polukoshko

 

Model of a vertical rotor with a ball‑type automatic balancer

57

Guntis Strautmanis, Mareks Mezitis, Valentina Strautmane

 

Oscillations of a rigid block on supported base

63

Munitsyn Alexander, Munitsyna Maria

 

Minimizing the vibration amplitude of rotating machinery running through the resonance area by application of magnetorheological squeeze film dampers

68

Jaroslav Zapoměl, Petr Ferfecki, Jan Kozánek

 

Study of the motion of a mechanical system due to the oscillatory motion of the side links

74

Sergey Jatsun, Lyudmila Vorochaeva, Sergey Efimov

 

Study of the oscillation of a wing mounted on an elastic suspension

80

Sergey Jatsun, Courage Sabau, Sergey Efimov

 

The study of oscillations of a rotor at the collision with a stator based on the quasidiagonalistic method

85

Vladimir Radin, Yury Samogin, Victor Chirkov

 

Contact problems in rotor systems

90

Liudmila Banakh

 

Vibration of string lattice

97

Vladimir Astashev, Nikolay Andrianov, Vitaly Krupenin

 

Development and research of vibromixing reactor with rotationally reciprocating motion of impeller

102

Alexander Prikhodko, Anatoly Smelyagin

 

Numerical simulation of the coil spring and investigation the impact of tension and compression to the spring natural frequencies

108

F. D. Sorokin, Zhou Su

 

Development of spherical ultrasonic motor for space. Evaluations of durability under low temperature environment and temperature cycle

114

Taro Oohashi, Uichi Nishizawa, Shigeki Toyama

 

Dynamics rammers with two pairs of shock generators

120

L. A. Igumnov, V. S. Metrikin, I. V. Nikiforova

 

Experimental study of ultrasonic relaxation of residual stresses in the elastic plates

125

Albert Korolev, Andrei Balaev, Timur Baltaev, Boris Iznairov

 

Modelling of the process of vibro‑mechanical correction in long‑length parts

130

Albert Korolev, Andrei Balaev, Sergey Savran, Oleg Davidenko

 

On dynamics of a rigid body moving on a horizontal plane by means of motion of an internal particle

135

Boris Bardin, Aleksandr Panev

 

Pipe thread wear‑resistant ultrasonic hardening unit

142

Sergey Evsyukov, Sergey Nebogov, Igor Fedotov

 

On the analysis of forced oscillations of systems with two random sources of parametric effects

147

Boris Roev, Aleksey Vinokur

 

Analytical determination of the stability movement boundaries of the Jeffcott rotor with multi‑bodies autobalancer

152

Alexander Gorbenko

 

Influence of the resonance characteristics of free‑yaw small wind turbines on the performance

158

Nadezda A. Afanasyeva, Vitali V. Dudnik, Vladimir L. Gaponov

 

An optimum design of a double pendulum in autoparametric resonance for energy harvesting applications

163

Taizoon Chunawala, Maryam Ghandchi‑Tehrani, Jize Yan

 

The analysis of the ventricle assist device controlled rotor dynamics

169

Elena Ovsyannikova, Alexander M. Gouskov

 

Simulation of control system for resonant vibrating machines with two unbalanced exciters

174

Grigory Panovko, Alexander Shokhin, Sergey Eremeykin

 

Analytical approach of turning thin‑walled tubular parts. Stability analysis of regenerative chatter

179

Artem Gerasimenko, Mikhail Guskov, Alexander Gouskov, Philippe Lorong, Grigory Panovko

 

On the choice of dynamic regimes for two‑mass vibrating machine

185

Alexander E. Shokhin, Grigory Ya. Panovko, Konstantin B. Salamandra

 

Fault diagnosis based on vibration signal analysis

 

The increase of ship gas‑diesel engines’ reliability by means of specialized software and hardware systems use

191

Alexander Bordyug

 

Vibration generation and control

 

Model of evaluation of the efficiency of the ship’s diesel generator control system

196

Aleksandr Zhelezniak

 

Solving optimization problems of optimal control of operational parameters of oil reservoir

201

K. A. Sidelnikov, A. M. Gubanov, V. A. Tenenev, M. A. Sharonov

 

Developing system of automatic control resonant mode of a vibrating machine

208

Konstantin V. Krestnikovskiy, Grigory Ya. Panovko, Alexander E. Shokhin

 

Investigation of influence of high‑frequency vibrations on the stability of stationary rotations of Lagrange’s top

213

Mikhail Belichenko, Olga Kholostova

 

The approach to building the algorithm for controlling rotor motion in a hybrid mechatronic bearing

219

Roman Polyakov, Maxim Bondarenko, Denis Shutin, Leonid Savin

 

Investigation of the mechatronic system oscillatory motion with discrete feedback PD‑control

225

Sergey Jatsun, Andrei Malchikov, Andrei Yatsun

 

Seismic engineering

 

Seismic resistance of horizontal underground openings in anisotropic rocks

231

Janat Musayev, Algazy Zhauyt, Manap Sagatbek, Nurali Matikhan, Yerbol Kaliyev, Batyr Naurushev

 

The performance of semi‑rigid steel frame structure in progressive collapse

237

Hengchao Chen

 

Use of finite element model structures in reconstruction of buildings, located in built‑up area with complex hydrogeological and landscape territorial state

243

N. S. Sivtsev, N. V. Mityukov, O. V. Malina, P. A. Ushakov

 

Numerical realization of spatial model of system building‑base-ground

249

V. E. Lyalin, N. V. Mityukov, O. V. Malina, Y. O. Mikhailov

 

Modal analysis

 

Method for direct identification of optimum modal values of dynamical systems

256

A. I. Nistyuk, M. V. Danilov, N. S. Sivtsev, S. D. Kugultinov

 

Vibration in transportation engineering

 

The influence of operational factors on the contact‑fatigue effect of couple of wheel‑rail friction in curves of small radius

263

Janat Musayev, Algazy Zhauyt, Yerlik Nurymov, Gulnar Mamatova, Yerzhan Adilkhanov, Almas Alizhan, Timur Chigambaev

 

The interaction of the freight car and way taking into account deformation of assembled rails and sleepers

269

Zhastalap Abilkaiyr, Janat Musayev, Talgat Kaiym, Azamat Alpeisov, Assylkhan Alimbetov, Algazy Zhauyt

 

Fatigue damage virtual simulation research on heavy vehicle

275

Sun Li, Chen Nan

 

Flow induced structural vibrations

 

Improving a pipeline hybrid dynamic model using 2DOF PID

280

Yongxiang Wang, A. H. El‑Sinawi, Sami Ainane

 

Tidal stream generators, current state and potential opportunities for condition monitoring

285

Vassilios Kappatos, George Georgoulas, Nicolas P. Avdelidis, Konstantinos Salonitis

 

Mathematical modeling of hydroelastic walls oscillations of the channel on Winkler foundation under vibrations

294

Lev I. Mogilevich, Victor S. Popov, Anna A. Popova, Aleftina V. Christoforova

 

Mathematical model of elastic ribbed shell dynamics interaction with viscous liquid under vibration

300

Dmitry V. Kondratov, Anna V. Kalinina, Lev I. Mogilevich, Anna A. Popova, Yulia N. Kondratova

 

Stability and post critical behavior of supported panel in supersonic gas jet

306

V. P. Radin, A. V. Shchugorev, V. N. Shchugorev

 

Investigations of rotating blade for energy extraction from fluid flow

312

Janis Viba, Vitaly Beresnevich, Stanislavs Noskovs, Martins Irbe

 

Dynamics of assembled structures of rotor systems of aviation gas turbine engines of type two‑rotor

316

Anatoly А. Pykhalov, Mikhail А. Dudaev, Mikhail Ye. Kolotnikov, Paul V. Makarov

 

Hydrodynamic effects influence on lateral vibrations of rigid symmetric rotor with fluid‑film bearings

322

Leonid Savin, Sergey Majorov, Alexey Kornaev

 

Oscillations in biomedical engineering

 

Mechanism evaluation of agricultural power assist suit under development

328

Toshitake Araie, Tomozumi Ikeda, Uichi Nishizawa, Akira Kakimoto, Shigeki Toyama

 

Finite‑element study of vibration effect to fracture healing of a human tibia

334

Leonid Maslov, Jean‑Baptiste Etheve, Nikolay Sabaneev

 

Synergetic approach to control of axial left ventricular assist device rotor supported by magnetic bearings

340

Yulia Bogdanova, Alexandre Guskov, Mikhail Guskov

 

Effect of gait on the energy consumption of walking robots

346

Eugene S. Briskin, Yaroslav V. Kalinin

 

Chaos, nonlinear dynamics and applications

 

Nonlinear dynamic effect in synthetic fibres from semi- and rigid chain polymers

351

Alla A. Romanova, Pavel P. Rymkevich

 

The dynamics of a nonautonomous oscillator with friction memory

356

L. A. Igumnov, V. S. Metrikin, M. V. Zaytzev

 

Dynamics of gas turbine engines rotors taking into account non‑linear effects

361

O. Repetckii, I. Ryzhikov, Tien Quyet Nguyen

 

Testing of products on vibration strength and durability in the regime of chaotic oscillations

366

Mikhail Zakrzhevsky, Vitaly Beresnevich, Vladislav Yevstignejev

 

Nonlinear damping in vibration of CFRP plates

372

Olga Kazakova, Igor Smolin, Iosif Bezmozgiy

 

Problems of precise vibromechanics and vibroengineering

377

Darius Pauliukaitis, Edmundas Kibirkđtis, Kazimieras Ragulskis

 

Nonlinear oscillations of flexible pendulum systems under action of periodical excitation

386

О. V. Barmina, M. F. Zeytman

 

Oscillations in electrical engineering

 

Mathematical model of electromechanical system with variable dissipativity

392

Alexsandr Baykov, Boris Gordeev

 

Influence of electromagnetic stiffness on coupled micro vibrations generated by solar array drive assembly

397

Mariyam Sattar, Cheng Wei, Awais Jalali

 

Study of the motion of an electromechanical system in the presence of an elastic link and delay in the negative feedback loop of a servo drive

403

Sergey Jatsun, Peter Bezmen, Andrey Yatsun

 

Vibration characteristics of miniature stirling electric coolers

409

V. Kondratjev, V. Gostilo, A. Owens, O. Jakovlevs, J. Viba

 

Measurements in engineering

 

Research on intelligent bore peek and measurement system based on machine vision technology for gun barrel

414

Xinjie Shao, Shijian Zhu, Lijun Cao

 

Residual stresses distribution in Ti‑6Al-4V titanium alloys during laser shock processing

422

Gerontiy Sakhvadze, Alexander Shokhin, Omar Kikvidze

 

Experimental study of spring back of different sheet alloys by pre‑load laser bending

428

Saira Safdar, Ghazala Safdar, Ali Raza, Chengbao Jiang

 

Residual stress and microhardness increasing induced by two‑sided laser shock processing

434

Gerontiy Sakhvadze, Alexander Shokhin, Omar Kikvidze

 

Theoretical premises of a vibro‑inertial method of viscosity measurement

440

Elena Kornaeva, Alexey Kornaev, Leonid Savin, Alex Galichev, Alex Babin

 

Mathematical models in engineering

 

Cross‑lingual part‑of-speech tagging using word embedding

446

Wei Yuan, Lei Wang, Xiao‑Fei Sun, Wen‑Wen Pan, Jia‑Guo Lv

 

The fuzzy model of ships collision risk rating in a heavy traffic zone

453

Viktor A. Sedov, Nelly A. Sedova, Sergey V. Glushkov

 

The aspects of roll‑forming process dynamics

459

Leonid Kondratenko, Viktor Terekhov, Lyubov Mironov

 

Solutions of seepage equations in curvilinear coordinates

466

K. A. Sidelnikov, A. M. Gubanov, V. E. Lyalin, M. A. Sharonov

 

Diacoptical analysis algorithms of topological site models of information backup and storage carrier

470

A. I. Nistyuk, V. E. Lyalin, M. V. Danilov, Y. O. Mikhailov

 

Nonlinear crushing dynamics in two‑degree of freedom disintegrator based on the Bennett’s linkage

477

Munir Yarullin, Fanil Khabibullin, Ilnur Isyanov

 

Influence of the gap and the friction on trajectory reproduction accuracy in a multiaxis machine with CNC

483

O. V. Pas’, N. A. Serkov

 

A thermomechanical model of self‑oscillations actuation during metal machining

489

George Korendyasev

 

Generalized gap function in the dynamic interaction problems of elements of vibrational technological machines with “not holding” ties

495

Andrey V. Eliseev, Anatoly I. Artyunin, Sergey V. Eliseev

 

The effect of dry friction forces on the process of dielectric wafer grinding

501

L. A. Igumnov, V. S. Metrikin, A. V. Grezina, A. G. Panasenko

 

The fuzzy model of the emergency level assessment at sea

506

Nelly A. Sedova, Viktor A. Sedov, Sergey V. Glushkov

 

Dynamics of tripod drive with elastic self‑sustaining transmission

512

I. A. Nesmiyanov, V. V. Zhoga, N. S. Vorobieva, V. V. Dyashkin‑Titov

 

Equilibrium forms branching of a nanolayers system

517

A. V. Lukin, I. A. Popov, D. Yu. Skubov, L. V. Shtukin

 

About formation of the stable modes of the movement of multilink mechanical systems

522

A. S. Gorobtzov, E. N. Ryzhov, A. S. Polyanina

 

Research model robot‑hexapod under static and dynamic loads

527

L. A. Rybak, Y. A. Getman, I. P. Shipilov

 

Nonlinear filtering and identification algorithms for correlation‑extremum dynamic systems with random structure

531

Tatiana Kolosovskaya