JVE

Journal of

 

Vibroengineering

March 2017. Volume 19, Issue 2, Pages (724-1464), Numbers of Publications from 2351 to 2402. ISSN 1392-8716

Contents

 

Mechanical vibrations and applications

 

2351.

Effective computational model for a solution of turbocharger rotor dynamics

724

 

Pavel Novotny, Jozef Dlugoš, Aleš Prokop, Kamil Řehák, Peter Raffai

 

2352.

Study on the nonlinear transient response for the non‑contact mechanical face seal

737

 

Yao Chen, Guoyuan Zhang, Weigang Zhao, Feng Ji

 

2353.

An improved state space method for force identification based on function interpolation in the presence of large noise

751

 

Ting Wang, Zhimin Wan, Weiguang Zheng

 

2354.

Study of the optimization of matching between torsional vibration damper and elastic coupling based on energy method

769

 

Xiaodong Tan, Lin Hua, Chihua Lu, Can Yang, Yongliang Wang

 

2355.

Extending the modal incremental dynamic analysis method for structures equipped with viscoelastic dampers

783

 

Elyar Zafarkhah, Morteza Raissi Dehkordi

 

2356.

Dynamics characteristics of a rotary table motorized spindle with externally pressurized air bearings

801

 

Chundong Xu, Shuyun Jiang

 

2357.

Improved Craig‑Bampton method for transient analysis of structures with large‑scale plastic deformation

812

 

Peng‑bo Qian, Lin‑fang Qian, Xiao‑chun Yin

 

2358.

Multi‑objective topology optimization to reduce vibration of micro‑satellite primary supporting structure

831

 

Luyang Tan, Lin Li, Song Gu, Dong Wang

 

2359.

Vibration analysis of a cylinder with slight diameter and thickness variations

844

 

Heye Xiao, Jie Pan, Zhijun Zhao, Jiawen Chen

 

2360.

System identification of force transducers for dynamic measurements using particle swarm optimization

864

 

Jianshan Lu

 

2361.

Analysis and prediction on the cutting process of constrained damping boring bars based on PSO‑BP neural network model

878

 

Xianming Chen, Tieliu Wang, Mingming Ding, Jing Wang, Jianqing Chen, Jun Xia Yan

 

2362.

Research on transverse vibration characteristics of rope change device with clamping chain transmission in lifting system

894

 

Baofu Kou, Qiuzu Liu, Ning Li

 

 

Fault diagnosis based on vibration signal analysis

 

2363.

Analytical study of local damage on concrete slab subjected to a contact explosion

908

 

Singlin Yue, Yanyu Qiu, Ning Zhang, Mingyang Wang

 

2364.

Cracked modeling and vibration analysis of pipe with a part‑through crack

930

 

Zhihong Yu, Laibin Zhang, Jinqiu Hu, Jiashun Hu

 

2365.

Fault diagnosis of rotating machinery based on time‑frequency decomposition and envelope spectrum analysis

943

 

Yonggen Chang, Fan Jiang, Zhencai Zhu, Wei Li

 

2366.

A novel scheme on multi‑channel mechanical fault signal diagnosis based on augmented quaternion singular spectrum analysis

955

 

Yong Lv, Bo He, Cancan Yi, Zhang Dang

 

2367.

Experimental investigation on electrostatic monitoring technology for civil turbofan engine

967

 

Yibing Yin, Jing Cai, Hongfu Zuo, Huijie Mao, Yu Fu, Hongsheng Yan

 

2368.

Wheel vibration estimation of railway vehicle utilizing state observer

988

 

Shu‑bin Zheng, Xiao‑dong Chai, Le‑le Peng, Li‑ming Li

 

2369.

Virtual sensing for gearbox condition monitoring based on extreme learning machine

1000

 

Jinjiang Wang, Yinghao Zheng, Lixiang Duan, Junyao Xie, Laibin Zhang

 

2370.

Teager‑Kaiser energetic trajectory for machine diagnosis purposes

1014

 

Adam Gałęzia

 

2371.

Free vibration study of v‑shape and rectangular shape double‑sided cracks in a cantilever beam

1026

 

V. Khalkar, S. Ramachandran

 

2372.

Vibroacoustic technique for the fault diagnosis in a gear transmission of a military helicopter

1039

 

Mariusz Zieja, Pawel Golda, Mariusz Zokowski, Pawel Majewski

 

 

Vibration generation and control

 

2373.

Fluctuation characteristics and rolling control for an underactuated spherical underwater exploration robot

1050

 

Yansheng Li, Meimei Yang, Hanxu Sun, Zhimin Liu

 

2374.

The stability analysis of separated feed ultrasonic milling

1062

 

Yuemin Zhang, Bo Zhao, Yuqing Wang, Binbin Zhao

 

2375.

Vibration and aeroelastic control of wind turbine blade based on B‑L aerodynamic model and LQR controller

1074

 

Tingrui Liu

 

2376.

Analysis of multiple oscillations in a sampling reduced‑order sliding mode control in frequency domain

1090

 

Yu Shen, Xing He

 

2377.

Chaos control of a multi‑dimensional chaotic mapping system by modified stability transformation method

1103

 

Jilei Zhou, Canchang Liu, Chuanbo Ren

 

2378.

Adaptive backstepping sliding mode control for heavy‑weight airdrop operations

1116

 

Ri Liu, Xiuxia Sun, Wenhan Dong, Xuning Guan

 

 

Seismic engineering and applications

 

2379.

Seismic performance of steel frames equipped with buckling‑restrained braces (BRBs) using nonlinear static and dynamic analyses

1131

 

Mahdi Eghbali, Esmaeil Asadian, Gholamreza Ghodrati Amiri, Seyed Ali Razavian Amrei

 

2380.

Damage mechanism of stabilizing piles suffered from liquefaction based on dynamic numeric analyses

1147

 

Rong‑jian Li, Han Luo, Jun‑ding Liu, Ya‑lin Wang

 

2381.

Effect of using linear multiple tuned mass dampers on concrete structures with hysteresis behavior

1158

 

Mohammad Shooshtari, Hamid Mortezaie

 

 

Modal analysis and applications

 

2382.

Influences of physical and structural parameters on vibration modes for large‑scale rotating wind turbine blades

1173

 

Jianping Zhang, Fengfeng Shi, Helen Wu, Jianxing Ren, Hao Wang, Danmei Hu

 

2383.

Adaptive estimation of VMD modes number based on cross correlation coefficient

1185

 

Hongbai Yang, Shulin Liu, Hongli Zhang

 

 

Vibration in transportation engineering

 

2384.

Modeling of dynamic characteristics of freight car withoptimized parameters of wedge‑type shock absorber

1197

 

Vladimir Solonenko, Narzankul Mahmetova, Janat Musayev, Mikhail Kuashnin, Algazy Zhauyt, Toty Buzauova

 

2385.

Optimization of vibration reduction of the rubber floating‑slab tracks

1214

 

Hao Jin, Shunhua Zhou, Weining Liu

 

2386.

A novel tread model for tire modelling using experimental modal parameters

1225

 

Zhen‑feng Wang, Ming‑ming Dong, Wei‑peng Zhao, Liang Gu

 

2387.

Research on ride comfort and safety of vehicle under limited conditions based on dynamical tire model

1241

 

Yongjie Lu, Wengang Zheng, Enli Chen, Junning Zhang

 

2388.

Ride improvement of vehicle suspensions with switchable inerter based on force cancellation strategy

1260

 

Ming Foong Soong, Rahizar Ramli, Wan Nor Liza Mahadi, Ahmad Saifizul

 

2389.

Levitation chassis dynamic analysis and robust position control for maglev vehicles under nonlinear periodic disturbance

1273

 

Haiyan Qiang, Wanli Li, Yougang Sun, Xiangyong Liu

 

2390.

Discrete approximate optimal vibration control for nonlinear vehicle active suspension

1287

 

Shi‑Yuan Han, Xiao‑Fang Zhong, Yue‑Hui Chen, Gong‑You Tang

 

 

Flow induced structural vibrations

 

2391.

Aerodynamic performance analysis of wind‑sand flow on riding‑type hangers of suspension bridges

1301

 

Shengli Li, Shunyun Zheng

 

2392.

Based on lacing wires influence of coupling vibration of a multi flexible disks turbine rotor system by two methods

1314

 

Yi‑Jui Chiu, Sheng‑Rui Jian, Chia‑Hao Yang, Guo‑Fei Yu

 

2393.

Radial force within two‑stage axial‑flow blood pump based on LES

1332

 

Xiaohu Sang, Xiaojun Zhou, Xiaoguang Liu, Xiaoru Hao

 

2394.

Experimental study on characteristics of self‑excited oscillation pulsed water jet

1345

 

Zhe Zhou, Zhaolong Ge, Yiyu Lu, Xinwei Zhang

 

2395.

Experimental study of vortex‑induced vibration for drilling risers under uniform flow current

1358

 

Liangjie Mao, Qingyou Liu, Shouwei Zhou, Zugang Long

 

 

Oscillations in biomedical engineering

 

2396.

Numerical investigation on the propulsive performance of flexible flapping fins using CFD/CSD method

1372

 

Long Liu, Haisong Ang

 

2397.

Design and the main parameters of tube‑shaped ultrasound wave guide wire

1383

 

Algimantas Bubulis, Vladimir Minchenia, Vincentas Veikutis, Jonas Navickas, Vytautas Bakanauskas, Paulius Palevičius

 

 

Chaos, nonlinear dynamics and applications

 

2398.

Instability behaviors of a cylinder array under both increasing and decreasing flow velocities

1393

 

Xu Zhang, Bin Jiang, Xiaoming Xiao

 

 

Oscillations in electrical engineering

 

2399.

Torque and thermal characteristics analysis of a fluid damping based multi‑degree-of‑freedom motor

1409

 

Zheng Li, Wei Nie, Ruodong Zhi, Zengtao Xue, Qunjing Wang

 

 

Acoustics, noise control and engineering applications

 

2400.

Numerical simulation and experimental research of spectral noise characteristics for the four‑wheel landing gear

1428

 

Ting Li, Jin‑hua Zhang, Bao‑zeng Wang, Tao Xue

 

2401.

Research on the distribution of aerodynamic noises of high‑speed trains

1438

 

Wei Te Lu, Yan Wang, Chun Qin Zhang

 

 

Fractional dynamics and applications

 

2402.

Bursting oscillation and bifurcation mechanism in fractional‑order Brusselator with two different time scales

1453

 

Jufeng Chen, Xianghong Li, Jingyu Hou, Dawei Zuo