High frequency large stroke design and simulation experimental research on shaking table

Jin Gao1, Chaowei Li2, Dongying Wang3, Wenbin Du4, Shili Li5, Qiang Lei6

Northwest Institute of Mechanical and Electrical Engineering, 712099, Xianyang, P. R. China

2Corresponding author

E-mail: 1gaojin100@163.com, 2lizyuan@163.com, 31197791846@qq.com, 4alen_dwb@163.com, 5rob.haha@163.com, 6hyleiqiang@foxmail.com

Received 7 September 2017; accepted 26 September 2017

DOI https://doi.org/10.21595/vp.2017.19072

 

Abstract. Firstly, this paper introduces the design of high frequency large stroke vibration table according to the applicable environment. Secondly, the three-dimensional solid model is established which is based on solidworks2012 environment. The kinematics and dynamics simulation of the shaking table model are carried out. The vibration test curve of the vibrating table is obtained, and the reason of the change of the vibration curve under different vibration frequency is analyzed. Finally, this paper concludes that this exciting scheme is feasible and effective.

Keywords: high frequency large stroke vibration table, virtual prototype, simulation experiment.

References

[1]        Gao Chunhua, Ji Jinbao, Yan Weiming, Li Na Development of seismic simulation shaking table technology in China. Journal of Civil Engineering Society, Vol. 47, Issue 8, 2014, p. 9‑17.

[2]        Li Wei, Rong Ruanjian Experimental study on vibration characteristics of high frequency electro - hydraulic shaking table. Fluid Drive and Control, Vol. 3, 2013, p. 4‑7.

[3]        Zou Zhenxing, Zou Beini Discussion on calculation method of basic parameters of centrifugal mechanical shaking table. Environmental Technology, Vol. 8, 2014, p. 57‑61.

[4]        Wu Shangshegn, Huang Zexing, Lu Zhenwei, Zhou Yunqi Design and simulation analysis of shaking table with axial thrust roller excitation. Vibration and Shock, Vol. 2, 2014, p. 64‑68.

[5]        Shi Qinglei, Yang Lizhi, Gao Feng, Ma Shulin Design of a small low - frequency standard shaking table. Earthquake Engineering and Engineering Vibration, Vol. 34, Issue 6, 2014, p. 256‑263.

[6]        Hu Yong, Ling Mingxiang, Wang Jue Modeling and simulation of coupling dynamics of two degree of freedom swing table. Machine Tools and Hydraulic, Vol. 42, Issues 7‑122, 2014, p. 124‑128.

[7]        Tan Yonghua, Cai Guobiao Research on virtual simulation of shaking table. Mechanical Strength, Vol. 32, Issue 1, 2010, p. 30‑34.

[8]        Cui Weiqing, Fan Shuncheng, Li Yanyan, Wang Shengkai Virtual prototype modeling and simulation analysis of hydraulic shaking table. Machine tools and hydraulic, Vol. 40, Issue 9, 2012, p. 141‑143.

Cite this article

Gao Jin, Li Chaowei, Wang Dongying, Du Wenbin, Li Shili, Lei Qiang High frequency large stroke design and simulation experimental research on shaking table. Vibroengineering PROCEDIA, Vol. 14, 2017, p. 162‑166.

 

JVE International Ltd. Vibroengineering PROCEDIA. Oct 2017, Vol. 14. ISSN 2345-0533